Category: 24-stitch

 

This Singer 210 memo-matic came to me in a very good shape yet still needed some TLC….

When I purchased it, I did not know much about Singer/Studio machines. So, I first restored Singer/Studio 360 and only then pulled this one out from my closet

I have to say that my shoulder did not complain a whole lot because this machine feels lighter than all others I handled so far. It is still not the lightest but I think what makes it light is that it does not come with a hard case cover. It came in a nice original cardboard box with Styrofoam layer, in which all accessories were stored.

 

This machine works flawless. I made a blanket on it while testing all its tuck and slip punch cards.

 

 

Pros:

(+) Worked great

(+) Looked at first not as overwhelming as other machines: it has less knobs and does not have a built in knit leader

(+) Not electronics – no need to rely on old electronic mother boards or on electricity

(+) Light-weight because it has no hard case cover but comes with the nice original cardboard box and a Styrofoam packing.

(+) easy to handle row counter: some row counters are flaky and the numbers jump back and forth when you are changing the dial manually…This dial did not give me any troubles at all!!

(+) putting machine and accessories into the case is really straightforward. Those who tried and struggle with placing the machine back into the storage into cases with hard cover (in which the sinker plate and the mast are stored in the lid) know what a struggle it is!! No struggle in this case – all accessories are inside a Styrofoam molds, which a re placed on top of the bed, which adds additional cushioning and security while storing the transporting the main bed.

(+) The carriage has a release lever which helps to remove the carriage in the middle of knitting (if it gets stuck) without removing the sinker plate.

 

Cons:

(-) the absence of hard case cover might be considered by some people as a con since storing this machine might come with its challenges: what is the carboard gets wet, what is the mice eat the Styrofoam?…It was not a problem for me and indeed, I liked it that it was not as heavy as my other machines.

(-) as with all Singer/Studio punch card knitting machines the patterning drums might freeze if the machine has not been used in a long time or stored, especially outside. This can be fixed though by spraying AeroKroil. There are a lot of resources explaining how to do it.

(-) not electronic and because of this the automatic patterning is somewhat limited. However, it is limitless, in combination with some manual stitch manipulation.

(-) does not come with cast-on combs – this was probably the biggest challenge for me (but I took cast-on combs from my other machines).

(-) I personally found that the tension mast is a bit close to the place where I was clipping the punch cards. It might not be a struggle for other people and it really was not for me, but I though I would mention it….

 

 

Compassion with Singer/Studio MemoMatic 360:

The comparison below simply shows difference features of the two models, and these features are not necessarily pros or cons. The reason I decided to put this comparison table together since, in my opinion, this machine is almost the same as Singer 360…. So, see below…

 

 

I really hope you will considering purchasing this model as your standard gauge machine (from me or from other seller). It is a great machine and definitely deserves your attention and love!

 

I purchased this machine, as all my others, with several other ones in a bit lot of various knitting machines. To learn punch card machine and knitting with a punch card pattern mechanism, I chose this particular machine because it was the most complete and best looking, I wanted to make sure I learned on a good machine so later on I can figure out problems with other, less ideal, machines.

If you want to see how it works, check out my youtube video.

Unlike other similar rescued machines, this had all accessories, including ravel cord and a small container with oil!! the lace carriage is not included though as it often sold separately.

Almost all accessories fit into the small compartment on the left-hand side of the carriage. The picture below shows this compartment but the majority of the accessories are working since I took this picture in the midle of knitting a garment

 

I tested this machine extensively – in action: I knitted a whole garment from the beginning to the end using a punch card number 12-A. I tested several other punch cards on tuck and slip settings. I did not try any lace patterns. I tested the knitleader buttons and knobs but I did not use it – I do my own calculations on decrease/increases.

Both needles and bed were in excellent shape – absolutely no rust. I removed all needles to make sure because sometimes when the sponge bar gets too old, it can corrode the needles.

 

Here is an overall picture of what is included :

 

This machine has a lot of excellent features.

Pros:

• The patterning drums make it very easy to move the machine. They engage with the punch card mechanism very nicely without much noise.
• The manual is very well-written and I was able to follow the instructions with ease and to learn all the techniques.
• The other two brochures included with the setup up contain information on the settings for punch cards to achieve certain pattern as well as how to knit garments of various shapes. I know these are available online, but when one knits, it is always nice to have a hard, high-quality, copy handy. Needles are easy
• Easy-to find replacement needles since these models are relatively “newer” ones. I get mine on Aliexpress.
• The tools are pretty standard and are pretty interchangible with other models.
• Some might find having the built-in knit-leaders very handy: there is no need to have a separate long setup laying around – in this setup all fits into one carrier box
• Includes an optional lace carriage
• I found that putting this machine to storage and opening and closing is much easier than multiple brother machines I had a chance to struggle with. There is a very clear schematic on the cover with the order of how placing the parts together. I found this extremely helpful as putting these machines away is often a big frustrating struggle.
• The carriage has a release lever (earlier Studio/Singer models do not), which is very convenient when a carriage needs to be removed from the bed in the middle of knitting if it gets stuck. In earlier models without this lever, one needs to unscrew the sinker plate and then lift the top cover of the carriage to remove the carriage from the bed.

The cons are:

• no timing belt, which might make the carriage movements somewhat hard depending on your tension and knitting pattern and technique. It was not a problem for me at all but after 200 rows of knitting my garment my hands and arms were a bit soar. Well, I guess this is how I can substitute my work out now.
• The most significant flow in my mind is that the patterning drums often get stuck if not oiled regularly, especially when not used for a very long time or put into storage (I restored already two OTHER machines where the drums were simply shut… They needed soak in an oil bath and some heavy-duty disassembling). To avoid this problem, put some light oil regularly on the patterning drums. Lucky for me, this machine had the drums in excellent shape
• Unlike Brother punch card machines, lace carriage is in a separate box. So, just one more thing to keep track off.
• The row counter dial is at the end of the bed. Not too inconvenient but I personally prefer the row count to be right in front of me – not at the end of the bed.

 

Well, below is one more look at this wonderful machine. Sorry for so many pictures of this machine – I just could not get enough of it – it is so perfect!!! Alas, I want now to restore my other I want now to learn Brother punch card machines and then electronic ones.

The whole setup right now is for sale on my Etsy page.