Category: Knitting Machine

Brother Profile 585 for Georgia

Brother Profile 585 is a 8 push button machine with a pattern center. Read more about this model in my previous post.

Here is a brief overview of the setup prepared for Georgia with its pros and cons.

The machine was cleaned, the pattern center was checked for all functions. All needles were inspected, cleaned and tested (when knitting on a full bed). The carriage functions were tested manually (I moved all knobs and levers) and in work while knitting hold, tuck-, slip- and stockinette stitches. Lace carriage and lace knitting were not tested. However, the lace carriage for KH585 is very simple and I do not anticipate any problems with it.

The machine comes with all major assesories. All of them are in excellent shape (especially the cast on combs). A typical setup for Brother Profile 585 usually has only one cast one comb but this machine came with two – a long and a short one. They are metal and heavy on their own – excellent for cast on without any additional weights.

The handle (that screw onto the main and lace carriages) are from another setup. So, the color mismatches a bit the main blue color of the machine and other assesories. Because I had to borrow a handle from another setup, the lace carriage will not have a separate handle. (read more on that below)

The minor assesories that are NOT included are:

  • Parafin wax
  • Assesories kit (it is simple a plastic cover for transfer tools and spare needles)
  • Oil bottle (it was yellow and old and I discarded it). A gun oil from Amazon is recommended to use
  • Cast-on thread: I typically use any silky thin yarn/thread.
  • Only a handle for the main carriage is included. The handles are interchangible with the main carriage and the lace carriage. I could only find one handle to supply with this machine. If I come across another one, I will ship it for free. However, lace carriages are used quite seldom by beginners… So, I hope by the time you decide to try lace carriage, I will find an additional handle. Regardless, the lace carriage can be moved by hand without a handle: there are less moving parts and it simply slides on the main bed while transferring the stitches. Also, lace carriage is used for 1-2 rows in a pattern and then the main carriage is used.
  • Plastic case for spare needles
  • The hard copy of the manual is also not includd but can be found online. I strongly recommend folloiwng the manual while setting up and testing and learinig how to use this machine. It is written very well. The manual has some simple patterns. For more complex and diverse patterns check out this brochure.

This machine worked great as you can see in my video. I had no major problems with it. Some minor potential problems are:

  • An auxiliary rail on the left-hand side is missing. These are needed to secure extension rails when knitting with lace carriage. So, you will simply need to keep your lace carriage on the right hand side. I am currently looking for sources where – to get the missing one. When I find it, I will ship it for free. It will only inconvenience the operator while knitting lace.


Some buttons need a bit firmer pressing than others (in the video it is sometimes button #5). But with firm pressing the button remain in their pushed-in position.

Some snags occurring during the video demo were because of some knots in the yarn – it was an old cone I inherited with one of the machine knitting machine lots.

The tension dial on the main carriage has a piece broken off. The dial still rotates well without any problems. The damage is simply cosmetic.

The lace carriage is missing the name tag: you can see the glue is still on it but there is no name.

The case has minor scratches, discoloration, and dents. None affect how the lid closes and/or stores the machine.

Overall, this machine is in great shape and should knit without problems.

Singer 360 with 700 carriage for Isabella

Singer 360 knitting machine is a standard gauge knitting machine (distance between needles is 4.5 mm). The machine has a built-in knit leader. It patterns automatically using a punch-card mechanism.

Specifically about this machine cleaned for Isabella:

The carriage that came originally with this machine was acting up. I opened it up to fix and noticed that somebody already tried to fix it and assembled it incorrectly. I did not want to delay the delivery of the machine so this 360k will be equipped with a more advanced carriage from a 700mod model and a matching sinker.

The main bed, all needles, all knobs and levers on the punch-card reader and knit leader are in excellent shape. All needles were inspected and the machine has a new sponge. The machine was tested on full bed to knit stockinet, slip-stitch, tuck-stitch and 2-color fair isle patterning (see my video with these tests). All needles behaved flawlessly and the carriage was moving freely without any problems at all. I was very pleased! Below are the panels I knitted. As always, these will be converted to cowls/neck warmers for charity.

In general, all knobs and buttons on 360 and 700 carriages are the same. One major exception is the levers for the tuck-knitting. 700 carriage does not have those levers. It was actually very easy to knit a tuck-stitch pattern with this carriage. I had zero problems from the beginning. The tuck-brushes on the 700 carriage do not have to be moved and they do not get tangled in thread when knitting. All these are huge advantages.

I did not test the knit leader but all knobs and levers move freely.

The machine will come with all major assesories.

A couple of minor assesories missing are:

  • Only two yarn separators are included. These are needed to knit single-motif. So, with just two yarn separators you can still knit a single motif but only one per panel.
  • A tapestry needle is not included: any metal or plastic needle will do
  • Only two point-cams are included. These too are needed to knit single-motif. With just two point-cams you can still knit a single motif but only one per panel.
  • Only one unravel cord is included. I typically use any contrasting yarn: not very thick and preferably very silky.

I also included an extra tool – very useful for beginners: a claw-weight/cast-on comb. In this case, you can knit one row on every other needle, hang a cast-on comb, knit a couple more rows until all stitches are knit, and then knit on all needles (described better in this manual on p. 9)

Because this machine had two major parts from two different machines below is the list of resources and manuals that Isabella will need to knit usefully on this setup. These brochures are available for free and discuss how to use the machines and how to knit garments:

  • Operation manual for 360mod knitting machine. This is a resource to go to when you need to know how to setup your machine, how to assemble it, troubleshoot, etc.
  • Knitting manual describes how to swatch, calculate gauge, how to use pattern paper and a knit leader to knit garments and how to make cloth in general.
  • Pattern book shows how the patterns on punch cards will look when knitted using different techniques. Although some of the cards might be slightly different.
  • Operation manual for 700 machine. Here is learn how to setup the knobs and levers on your 700 carriage.
  • Read pros and cons of Singer 360 in my previous posts:

http://thoughtsandknits.com/2022/09/04/360-for-laura-cleaned-in-august-2022/

http://thoughtsandknits.com/2022/08/07/studio-360-k-memomatci-reported-in-august-2022/

http://thoughtsandknits.com/2021/10/13/my-first-singer-360-memomatic-360k/

Now about imperfections:

The imperfections are mostly on the top lid of the whole case. It has several minor bumps.

There is one bend in the middle but the machine still closes. I decided against beating it up with the hammer to straighten it because It creates additional microcracks and makes the metal more prone to corrosion. The lid still closes with just a small push.


The case panel that attaches to the main bed (the bottom panel) has one bend as well (not shown in here).

The end-cap of the lid has a crack. It is pretty minor so I did not replace it to keep the cost low.

I am 100% confident that you will like this machine like I did!!! Happy knitting!

KH585 profile refurbished in April 2023

Brother Profile 585 (sometimes called KH585) is an 8-push button knitting machine manufactured by Brother Company in the early 1970-ies or late 1960-ies. It is one of the last machines (besides Profile 588) to have metal end caps, which makes this machine very durable, and easy to ship and handle. Its bed is narrower than later models (with numbers above 710).

In addition to eight push buttons that control which needles will be selected, Brother Profile 585 has a pattern center. It includes the push buttons, reset button, A/B and L/R knobs. Reset button (blue on the left-hand side) unpushes all buttons currently pushed in. A/B knob determines which needles will be brought forward: those selected (the knob in position A) or Not selected (the knob in position B). L/R knob determines how much to shift the needle selection. This shift is shown on the small dial on the left-hand side. It might sound confusing but once you start working according to got the instructions in the manual, it will be more clear.

Specifically about this machine:

The machine was cleaned. A new sponge bar is inserted. All needles are inspected and cleaned manually one by one. The machine was tested on all needles to knit stockinet, tuck-stitch, and part-knitting patterning. Details of this testing are shown in my video. All tests went great and all needles knit wonderfully. Push buttons are very easy to operate. Just in some cases, they need to be pressed very firmly but it happened just once. Typically, when it happens, I just reset all the pattern center knobs.

The machine came to me without any assesories so I made a set from my own supplies. So, all major assesories will be included and some extra.

Comes with all major assesories. The assesories did not come with this machine but I made a set of all major tools. The selection rulers are not identical to those mentioned in the manual but is a good start.

Minor assesories not included are:

  • Unravel cord (any smooth thread will work)
  • Wax (the one that came with the machine was crumbled but when I tested the machine with acrylic yarn I did not feel the need for waxing)
  • The box for assesories (including its lid) is not included as it was missing from the original setup
  • The needle selection rules are somewhat different than in the manual but I included couple of extra ones
  • A hard copy of the manual is not included but can be found online (it is a generic one for 8-push button machines).
  • Oil bottle (I threw it away – was too old) but a gun oil can be purchased on Amazon

The mast that came with the original machine was causing me problems. I replaced it with the working one from my stash. So, it fits a bit funky into the lid but is still manageable.

The assesories setup comes with only a long cast-on comb. To knit swatches, I recommend purchasing a small cast-on comb like this one or this one.

The rail guards need to be a bit lose when inserting the rails. Tighten them after the rails are inserted. Also, if using a ribber, they need to be removed. Keep them in a safe place because the replacements are hard to find.

The only imperfections with this machine were on the case itself (see the pictures below).

One minor rust spot on the lid (on the end cap). The case has usual very minor pumps and discolorations.

Some minor bumps and scruffs on the case:

Other than that I don’t have any other complaints or imperfections for this machine.

Below is what I knitted on this machine while testing it: a reversible cowl/neck warmer/hood.

I hope you, a reader of this blog, will be soon a proud owner of this machine!!

Brother Profile KH552 refurbished in Mach 2023

 

Brother Profile 552 knitting machine is an 8-push button knitting machine. It is probably the first 8-push button machine and it appeared on the market around 1964. The pattern center includes eight needle selection buttons, a reverse lever, a slide dial, and a set lever. 

This is my fifth 8-pushbutton knitting machine refurbished and prepared for other knitters and I am completely falling in love with these machines!!

The role of the set lever is to bring the needles forward: you push the corresponding buttons and then rotate the set lever with a special wrench and the needles move forward.

The role of the reverse lever is that: for example, you want to select needles 2 through 8. So, you simply push button #1, turn the reverse lever to B and rotate the set lever: all but needles in position 1 will be brought forward.

The role of the slide dial is to shift the needle selection. For example, a pattern requires the selection of needles 1 and 5, then 2 and 6, then 3 and 8. Instead of pushing and unpushing the corresponding buttons, you simply push buttons 1 and 5 and then simply move the slide dial to the corresponding number of places. If you move the dial only once, needles 2 and 6 will be selected even though buttons 1 and 5 are still pushed in. If you move the slide dial two places, then (even though the buttons 1 and 5 are pushed in) needles in positions 3 and 7 will be moved forward.

The additional patterning is accomplished by moving and holding the cam lever in positions I, II, or III and by pressing pattern selector buttons.

Now about this specific machine. I refurbished, cleaned, and serviced it. A completely new sponge bar was inserted. All needles are cleaned and inspected individually. They were also checked by knitting on a full bed to make sure they form the stitches properly.

It will come with all major assesories:

  • The toolbox with a lid
  • Latch hook, crochet hook
  • Transfer tools
  • Needle selection rulers
  • Claw weights (greenish to match the color of the machine)
  • Brush to clean the carriage and the needle bed
  • Replacement needles
  • Ratchet for the set lever
  • Carriage lock
  • Handle for the mani carriage
  • Two cast-on combs – one long for the full bed and one shorter for swatches
  • Table clamps
  • I will even include
  • Yarn mast
  • Bottle with oil
  • Wax (two small wax cylinders will be included – the reason why is below).

The hard copy of the manual will not be included but it can be found here. Additionally,

All these assesories are shown in the picture below.

The assesories fit nicely into a special toolbox.

And the toolbox then sits on the bed. So, you have all you need for your knitting set up in one place.

I always like to knit on a full bed when I test my machines. First, it gives me a chance to see if I overlooked any defective needles. Even when inspecting each needle individually, it is easy to miss a latch that is not moving as freely, a slight bend in the tip of the needle, etc. So, when I knit on a full bed, I see immediately if there are needles that repeatedly mispattern or create strange stitches. If defects on the fabric occur randomly – it is very likely not a defective needle since these defects might be due to the carriage snags, some small knots, or imperfections in the yarn (yarn splits sometimes, which might also result in uneven stitches randomly appearing on the knitted fabric).

The second reason to knit on a full bed, which is especially important for push-button machines, is to see if all needle pushers inside the machine are working as they are supposed to be. The patterning mechanism on push-button machines uses long strips. They look sort of like needle selection tools (some people call them combs or rulers). Each metal strip has “teeth”, shifted by one position on each strip. There are 4 strips for 4-button machines and 8 for 8-button machines. The position of the teeth is shited by one on every strip. There are, accordingly, 4 and 8 positions on the strips for 4- and 8-button machines. So, if these “teeth” are bent, or damaged, not all needles will be pushed forward. And this is what I am checking when I knit patterns on the full bed on push-button machines.

 

 

So, on this machine, I knitted slip-stitch and tuck-stitch on the full bed. The stockinet was very easy to knit. When I knitted the pattern, I noticed that the tension was getting tighter and tighter. It was due to the static accumulation. This was the first time I experienced such static accumulation (using the same yarns on other machines) but attaching a wax to the tension mast solved the problem.

Knitting a 1×1 tuck pattern on this machine uses all needles. In the first row of the pattern, all odd needles are selected and in the second row of the pattern, all even needles are selected. So, on a full bed when knitting this tuck-stitch we test the needle selection and how needles knit the tuck-sitch. All went well as shown in my video. After such a successful test, I then knitted a pouch for my husband’s paddle (the knitting process is shown in the video, and the end result is on the picture to your right).

This brings us to the imperfections of this particular Brother Profil 552 knitting machine:

Buttons need firm pushing. Sometimes I had to press the button twice or three times. The firmer you press, the fewer times you’ll need to repeat pressing. Also, all the levers need to be in their default positions when you start pressing the buttons. Once the buttons are pressed, they are firmly sitting in their positions and do not jump back. It took me some time to get used to firmly pressing the buttons. But once I got used to the right force needed to push the buttons and reset all levers before, all went smoothly. This is one of the reasons this machine needs a patient knitter. Watch my video to see how these buttons sometimes misbehave.

The second imperfection of this machine is slight discoloration of the metal surface as well as roughness. I only see this discoloration on the carriage. However, keeping in mind that this machine is over 55 years old, this should not be surprising. And I still think that this machine has a lot to offer for another 20-30 years, especially if serviced and maintained well. However, because of this, the static accumulation on this machine is a bit more than average. But this problem is solved by using wax and regular oiling. Thus, with this setup, I am including two wax cylinders. This is the second reason this machine needs a patient and caring knitter who will ensure all the setup steps are undertaken prior to the knitting and ensure this machine is well-kept and serviced timely. One tube of oil will be included. Another good oil to use is gun oil on Amazon.

The third imperfection is the levers on the carriage. The lever on the right-hand side slides not as smoothly as on the left-hand side. The metal bracket on the left-hand side was popped out when I got this machine. I fixed it and secured it (it will NOT pop out again) but the metal grooves are not as smooth). I am a petite woman with medium-strength hands and I still move the levers without too much force. At the end of my video, I show the movements of these two side levers.

Video of tests and demo of all imperfections is here.

A couple of cosmetic flaws are shown in the photos below.

Scratches inside the lid:

Minor dents on the outside of the lid.

Scuff mark on the right-hand side of the carriage.

The machine knits wonderfully despite imperfections. In fact, push-button machines handle some unusual yarns better than punch-card machines (not sure why but maybe due to the more fragile nature of the punch-card mechanism – if lint or dirt is stuck in it, it will not pattern properly…??). This is why I like these machines so much. They are working horses!! A combination of automatic stitches selection with hand manipulation of the needles will give a knitter a lot of possibilities!! Yes, punch cards and electronic machines are more versatile and people think they are easier. But think about it: to come up with a novel design for a punch-card machine, a knitter needs to carefully punch a card and then test it. But the design is limited to a 12-24 stitch-repeat pattern. Yes, on an electronic machine one can use repeat patterns with more stitches but then the software is needed, special cables and all those machines are still expensive to buy!!

The bottom line is: there are fewer things going wrong with the mechanically-patterning push button machines and this is why I love them and highly recommend them to a beginner machine knitter or to hand-knitters who still would like to maintain the satisfactory feeling of knitting by hand but with a bit of help from the machine in speed and forming more even stitches!!

I am currently testing KR580 ribber, which fits Brother Profile KH552 machine.

 

Brother KH588 knitting machine

Brother KH588 knitting machine is a gauge (4.5 mm) knitting machine manufactured in Japan. It features 200 needles and is capable of patterning using semi-automatic needle selection performed by 8-push buttons and a pattern center. It was manufactured in the mid-seventies of the last century. I could not find more precise information on their first appearance on the market.

The machine and all associated assesories are blue in color. The end caps of the machine case and the lid are metal. The machine comes with a lace carriage, cast-on combs and extension rails to hold the lace and the main carriages. The handles on these carriages detach (screw on) and when not in use, are stored separately in the lid on the toolbox.

The pattern center features 8-push buttons, a set-lever (it engages by a special ratchet tool and moves the needles after the corresponding buttons are pushed), a reverse lever (to determine whether the operator wants to bring forward the needles that are selected or those NOT selected), slide dial (the knob helping the knitter to shift the needle selection by 1-8 positions without pushing/unpushing or selecting/unselecting the needles) and MC change lever.

The picture below shows part of the pattern center for the KH588: 8 push buttons, a reverse lever and a slide dial.

MC change lever has N and MC positions also accompanied by the open and black triangles, which helps if you get a machine with Japanese writing for all main functions on the main

bed and carriage. MC change lever is used for fair isle patterning (when moved to the MC position).

The shapes of the table clamps is typical for older models – with two wide screws, one of which is attached to the main bed.

Unlike many other machines I refurbished, Brother KH588 comes with laying-in thread feeders (two metal pieces laying next to the blue claw-weights in the picture to the left). They are used for weaving. They are inserted under the knobs between the knob and the sinker plate.

The KH588 machine I worked on had all words written in Japanese (see the picture below). Next to it is a carriage from Brother KH588 released to the English-speaking market. Unlike some other Brother machines, including some 8-push buttons ones, holding cam levers (marked on the bottom side of the carriage as I, II, and III) are moving horizontally along the low side of the carriage. On many machines, these cam levers are on the side. The carriage also has a change knob (on the top right-hand side of the carriage). This knob chooses normal, weaving, or fair-isle knitting.

Brother KH588 can knit with KR586, KR587 and KR710 ribbers according to this chart.

Replacement needles for these machines are still available on the used market. They are shaped differently than newer models of Brother knitting machines. They have an unusual concaveness next to the needle butt which makes them stand out. Sponge/retaining bars, however, can be found easier. The retaining bar is 41 x 0.5 inch and those are still sold new. Some knitters replace only the sponge and any dense sponge with the smooth fabric top should work.

Since KH588 needle selection is fully mechanical, there are only a number of things that can go wrong and they are easily fixable (unlike electronic and punch-card machines). This feature makes these machines very reliable horses. It is excellent for designers who prefer to have control and like hand-manipulations. This machine is also excellent for beginners who just start machine knitting. I also feel that Brother KH588 would be an excellent fit for somebody who is transitioning from hand-knitting to machine knitting and simply wants to accelerate their work while maintaining satisfaction from manipulating stitches and patterns by hand. This machine is compact as the bed is more narrow than newer models. Because of this, it is light-weight of this machine makes it excellent for people who are not as strong with their upper bodies or for older knitters.

I hope this information helps you to know more about Japanese knitting machines and maybe to consider getting this machine for your craft, creative and/or production needs.

This article was published using my personal observations and experience using Brother KH588 knitting machine.

If you are interested to learn about other 8-push button knitting machines, check my other articles on KH710, KH581.

Brother KH588 and Genie 710 knitting machines: same or different?

Brother KH588 and Genie 710 knitting machines are both standard gauge (4.5 mm) knitting machines manufactured in Japan. Both feature 200 needles and are capable of patterning using semi-automatic needle selection performed by 8-push buttons.

This website states that these machines are the same but my experience is somewhat different as I had a chance to work on both machines. Below is my assessment.

Brother KH588

The machine and all associated assesories are blue in color. The end-caps of the machine case and the lid are metal. The machine comes with lace carriage, cast on combs and extension rails. The handle on the carriage detaches (screws on) and when not in use, is stored separately in the lid on in the tool box.

The pattern center features 8-push buttons, set-lever (the one that moves the needles after the corresponding buttons are pushed), reverse lever (to determine whether the operator wants to bring forward the needles that are selected or those NOT selected), slide dial (the knob helping the knitter to shift the needle selection by 1-8 positions without pushing/unpushing or selectin/unselecting the needles) and MC change lever.

The shapes of the table clamps is typical for older models – with two wide screws, one of which is attached to the main bed.

Brother KH588 comes with laying-in thread feeders (two metal pieces laying next to the blue claw-weights in the picture to the left). They are used for weaving. They are inserted under the knobs between the knob and the sinker plate. See the images below.

Picture below shows part of the pattern center for the KH588: 8 push buttons , reverse lever and a slide dial.


The pictures of the MC change lever (shown below) features the N and MC positions also accompanies by the open and black triangles, which helps if you get a machine with Japanese writing for all main functions on the main bed and carriage.

The KH588 machine I worked on had all words written in Japanese (see the picture below). Next to it is a carriage from Brother KH588 released to English-speaking market. Unlike some other Brother machines, including some 8-push buttons ones, holding cam levers (marked on the bottom side of the carriage as I, II and III) are moving horizontally along the low side of the carriage. On many machines these cam levers are on the side. The carriage also has a change knob (on the top right-hand side of the carriage). This knob chooses normal, weaving or fair-isle knitting.

Brother KH588 can knit with KR586, KR587 and KR710 ribbers according to this chart.

Genie KH710

Genie KH710 is white/brown/orange in color scheme and some with all the same assesories (lace carriage, extension rails, cast-on combs). The laying-in feeders did not with the standard setup for Genie KH710. The table clamps for this machine are of newer design: they simply slide into the main bed slots and then screwed on to the table.

Genie 710 has 8-push buttons, reverse lever, slide dial and the MC lever.


Carriage for Genie 710 featuring a change knob, foldable handle, set levers moving horizontally along the length of the carriage.


Genie 710 is very similar to KH588 and I will not explain in this post the purpose of the main levers and buttons as I did for KH588. I also have a dedicated post to KH710 specifically.

So, the summary of the differences:

  • Genie 710 did not come with the laying-in yarn feeders and KH588 did
  • Genie 710 is white and brown/orange in color and KH588 is blue
  • Handles for main and lace carriages screw on in KH588 and are permanently attached in Genie 710 but can be folded
  • End-caps for the main bed case and for the lid are plastic in Genie 710 and are metal for KH588
  • Table clamps are of different shapes: KH588 has clamps that screw on to the main bed and table clamps for the Genie 710 slide into the main bed to hold it to the table
  • KH710 is a bit newer model than KH588 judging by its computability with ribbers and newer table clamp design.

If you discovered other differences I did not mention, please message me so we can update this information. I would also appreciate if you message me if you found this article useful.

Brother, aka Genie KH710, refurbished in March 2023

Brother/Genie KH710 knitting machine is a 4.5 mm (standard) gauge machine with 200 needles. This chart states that it is the same as KH588 but my experience with both KH710 and KH588 is that those are slightly different (see my other post).

Brother KH710 is one of the latest models for the 8-push button knitting machines and has a lot of modifications not present in earlier models (like KH552-KH588). The case has more plastic (for example, end caps are plastic and not metal like in KH588 and earlier 8-push button models). The carriage covers as well as the handle are also not metal but plastic. The standard setup comes with a lace carriage and cast-on combs. The handle no longers screws on but is permanently attached to the carriage (good – fewer things to lose – I see so many machines arriving without these screw-on handles). But the handle folds for easier fitting into the case.

Besides 8-push buttons, genie 710 has a pattern center, which allows you to fix the needle selection and simply move the following needle selection relative to the initial position. It also allows (using the reverse lever) to select either needles push-in or select needles, not pished-in.

About this particular machine:

It was very easy to use it. The carriage slides very easily – in my video I show that I could use just one hand.

The machine comes with all major and minor assesories. 

The assesories fit nicely into a special toolbox with a matching lid.

The hard copy of the manual will not be included. The manual is available for download here. It mentions some of the patterns and button/lever variations. More patterns and variations of push buttons can be found here.

I inserted a brand-new retaining bar with a brand-new sponge. All needles were inspected individually. I tested this machine on a full bed using stockinet, pull-up, and tuck-stitch patterning (shown in my video). None of the needles were mispatterning and the knitted fabric looked even and great. 

After I gave it some TLC, the machine feels and looks like new. It is very lightweight (because end-caps are plastic.

The case has some cracks: see the pictures below but they do not affect the functioning of the machine.

Genie 710 is excellent for beginners or for advanced knitters who prefer hand-manipulations of stitches and needles. I hope you will consider adding this machine to your craft room.

Brother Simple Seven, also known as KX350, knitting machine

KnitKing Simple seven is a plastic flatbed knitting machine. It is also known as Brother KX350.

It is considered mid-gauge but it can actually knit pretty bulky yarns (like RedHeart Super saver).

This model of knitting machine is excellent for beginners as it is easy to maintain, operate, handle, and lift.

I have a lot of experience with Brother KX350 and can tell you it can handle many tough situations other machines often struggle with. I knitted cables (shown in my video specifically for this machine in here).

It packs nicely into an original box with the styrofoam pieces cut out for all the parts so there is no confusion about where each part goes. The box is a bit beat-up but still holds everything nicely.

The machine will come with all major assesories except for:

  • A can of oil. The oil that came with this machine was old and I discarded it. A good oil can be purchased on Amazon.
  • A hard copy of the manual will not come but can be found online for free.
  • A typical setup includes a videotape with instructions. But this machine did not come with a videotape. With a myriad of youtube videos available on this machine, I doubt you will miss that videotape.

Additionally, I will include 3 extra needles in case you need replacement.

A brand new sponge was inserted (the black strip shown under the needles in the under-carriage view of the machine shown below). So you will not need to replace it for several months.

This particular machine was thoroughly cleaned, and every needle was inspected and tested to make sure that they were all straight and no stuck latches. I knitted two headbands shown below and all stitches formed nicely.


I hope this blog convinced you to consider Simple Seven for your craft needs. It is a wonderful machine and is excellent not only for beginners but also for advanced knitters (who sometimes combine two or more beds to knit wider panels). If you got this machine and do not know where to start, patterns specific for Brother KX350 can be found online but any other pattern for the chunky machine will work too.

Read more about the Brother KX350 model’s pros and cons in my previous blogs.

http://thoughtsandknits.com/2022/11/07/kx350-cleaned-and-tested-in-november-2022/

http://thoughtsandknits.com/2022/10/11/flat-bed-brother-kx350-knitting-machine-cleaned-and-tested-in-october-2022/

$0.00

Click here to purchase.

Pictures of upgraded Singer 321 for Katherine

Overall view of the setup.

Right-hand side end cap on the main bed

The left-hand-side end cap on the main bed

The lid with replaced end-caps

The lid end cap upclose

2023-02-06 KH588 for Holly, cleaned and tested in February 2023

This is a Brother KH588 knitting machine with an 8-push button needle selection mechanism. This model was released to the market in the late 1960s-early1970s. This model is equivalent to a rebranded Genie 710 (in case you need to search for information related to this machine). These are other 8-push button models similar to this one: KH581, KH560, and KH552, but their pattern control center is a bit less “sophisticated”. The pattern control center in KH588 makes your job of creating patterns and following the sequence of which buttons and levers to push the easiest.

The “patterning center” consists of:

  • 8-push buttons. If a specific needle wants to be selected, the corresponding button is pushed. The red button cancels out the button selection.
  • Slide dial (the blu knob on the white panel. It determines in what direction (left or right) the needle selection will be moved relative to the very first selection
  • Slide indicator (to the left-hand side from the push buttons). It helps to determine in what direction the needle selection is moved and also what needles are currently being selected.
  • Reverse lever (the bluish knob to the right-hand side of the pushbuttons, it is left to the slide dial). If the reverse lever is pushed to the right, then the needles that are not selected by the pushbuttons will be moved (AKA selected).

    In my video, recorded specifically for this machine, I demonstrate three patterning techniques and how I moved the levers, knobs and a ratchet. At first, it took me a while to figure out a chart but after just 5 minutes, I was able to develop a groove and knitted faster without problems. More sophisticated patterns (many of them can be found here) will probably need a bit more concentration. I also tested knitting cables on this machine. The hardest part of the cables is to keep track of which stitches on which needles to swap. But with the patterning center on this machine, these positions can be kind of memorized by the buttons pushed and it makes keeping track of stitch-swapping easier.

A couple of things I personally found interesting in this model. Check out the carriage image below, in particular, the levers on the bottom left and right sides of the carriage with markings I, II, and III. This feature was unusual to me since in other early versions of Brother knitting machines (manual 4- and 8-push buttons) these levers are on the actual sides of the carriage. I found this feature of KH588 very convenient. The positions of the levers are right in front of your eyes and it makes it less hard to overlook the position of these levers (which happens quite often ).

About this particular brother KH 588 machine.

In this particular machine, the words on the carriage (with the exception of huge BROTHER branding) are in Japanese. I asked the knitting community and apparently, not all KH588 are in Japanese. At the very end of this blog, I show pictures to be used as English references.  Maybe this machine was brought from Japan.

Below are the pictures of pattern examples I tested (also shown in my video on all 200 needles).

  • The top is the tuck-patterning on every other needle (EON) selected. On this side, it almost looks like a seed stitch. On the other side, it looks like a ribbing, which I like a lot. I specifically did not say “right” and “wrong” sides because both of sides of this pattern can be right and wrong. This pattern is interesting on both sides.
  • The bottom pattern is a “holding” pattern, in which we bring every 4th needle to the holding position and do not knit on it and the yarn kind of hooks on these needles creating these bow-like knots. In hand-knitting, this is called a “butterfly” pattern.

  • The top pattern in the swatch below is the tuck/slip pattern. It creates a very interesting texture and is actually very easy to make. It creates sort of like a ribbing but not as tight as a full eon-tuck shown in the bottom part of this photograph.

The knitted fabrics I created while testing this machine were converted to the two cowls shown below. They are going to be donated to a charity in my area.


The machine comes with all major assesories, including the extension rail, cast-on combs (tucked in the lid), and the lace carriage.

A couple of minor accessories  missing are:

  1. Oil. It was too old and I tossed it. I recommend getting gun oil on Amazon.
  2. Cast-on thread. I typically use a thin contrasting yarn for this purpose.
  3. The toolbox has cracks: the plastic became old and brittle. The lid for the toolbox did not make it at all: died from old age

I included a 1×1 needle selection tool – it is not part of a standard setup but is very handy to use, especially for a quick 1×1 (or every-other-needle (EON) cast on).

The hard copy of the manual will NOT be provided but can be found in here.

Couple of other useful links:

  • A service manual in case your machine starts misbehaving;
  • A large variety of patterns that this machine can achieve.
  • I also feel that this manual (although it is for a slightly older model) describes how the patterning center works really well as well

    Now, about the imperfections of this machine and setup.

The posts, where the handle attaches to the lace carriage, show some rust. The handle still attaches well and effortlessly.

There are some minor rust spots on the sinker plate (on the underside, on one side only

The case has some pumps but nothing major. The toolbox has some cracks – the plastic is too old and brittle. It is also missing a lid (or it never had a lid – not sure since the manual says nothing about the lid).

None of these imperfections affected the working functions of this machine.

The machine came with several damaged needles and I had to replace them. Since nobody manufactures new needles for these machines, I had to use refurbished needles from a machine I stripped for parts. I tested the needles I inserted into this machine to make sure they knit well without problems. Here is the video of the exact needles I placed into this machine.

Below are the images of another KH588 but with all English writing (kindly provided by other push-button knitting machine enthusiasts from https://www.facebook.com/groups/PushButtonPatterningKnittingMachines) to be used as a reference when operating this particular KH588. I included the hard copies of these pictures with the setup for Holly.