Month: June 2023

Brother Profile KH500 Knitting machine is a lightweight machine with manual-only needle manipulation capability. It looks very similar to 4-push button machine, like Profile KH 551. But since it has a more advanced row counter, I assumed that it was manufactured after it – maybe in the very early 1970-ies. A could not find any specific information anywhere on the web or in printed brochures. Other indications that this machine was a later but simplified version of push-button machines is KH500 still has slots for the extension rail (but does not come with the lace carriage) and slots to attach a ribber. The original cardboard box still shows the older version of the row counter….

The standard setup comes with cast-on combs but without a case lid and without a lace carriage. To the best of my knowledge, this model does not have a compatible ribber but, based on my experience with similar machines and compatible ribbers, ribber KR551 and KR560-580 might be compatible with this machine.

The absence of the lid and needle selection mechanism makes this machine very light-weight, which is excellent for people with smaller complexion or with weaker upper bodies. It also makes this machine easy to transport. I kind of even like that this machine does not have a lid – it often takes a while to close the lid (after all major parts are tucked inside it), especially, if case or a lid were bent during the long life of this machine.

Despite only manual needle manipulation capabilities, this machine can still produce patterns: you just need to push needles to the desired positions by hand. With the several needle pushers with various gauges, it is easy – just need to keep track of which needles to select next! Some might say that it is a limitation, but some will argue that needle manipulation by hand is more satisfying and is closer to hand-knitting…

About this specific machine:

I inserted a brand-new retaining bar and sponge (not remade, but purchased from a supplier). I cleaned and inspected all needles: one by one. Cleaned under the main bed. I did not see any rusty on the machine or on the carriage. Overall the machine is in great shape and works great! A video of it being fully tested is here. In that video, I showed a couple of examples of how to create patterns on this machine (by manually selecting needles) and also stockinet on a full bed. The fabric knitted on a full bed was then converted to a bag/pouch to hold a pickleball paddle. My friend needed a new pouch with pockets and I needed to test a machine and practice how to create pockets!!! My favorite thing – combining education with producing something useful and something that makes people happy!!

The machine came with minimum assesories so I had to put together a set. To you, this machine will come with all major assesories with a couple of exceptions. So, this leads us to discuss minor flaws of the machine and the whole setup.

The minor assesories not included are:

• Cast on thread: any thin, strong thread/yarn will work instead
• Oil bottle – none came with the machine. A good oil for knitting machines is gun oil available on Amazon for purchase.
• The toolbox and its lid are not included.
• The carriage lock was missing but I fastened the carriage with a 3D-printed carriage lock.
• Paraffin will not come with this machine.

The left-hand side screw on the carriage that holds the knob to hold the sinker plate was bent really badly so I replaced it with a different, shorter, one. It is a bit wobbly while ONLY the clamp screw/knob is on top but is secure and not wobbly when is tightened on the carriage with the sinker plate attached. See a video – it shows what I mean.

The left-hand side claim on the tension mast is a bit cracked. To fold the tension mast and the yarn tension wires, loosen a screw (by just a notch) and fold it. When unfolding, secure the position by tightening the screw on the left-hand side end cap.

The fasting plate on one of the clamps comes off. In the past, I attempted to fix such a loose plate and honestly, it destroyed completely the thread making the whole clamp unusable. So, since these clamps just needed a bit of an adjustment (holding the plate while screwing the clamps to the table), I decided not to try to tighten or glue them to the threaded rod. These clamps are hard to find these days and since it worked with some adjustments, I decided not to mess with it.

.

I hope you will find these minor flaws not being flaws but just small things that add character to this machine. I believe that this machine in the hands of a designer or a hand-knitter trying to accelerate their masterwork or to knit more even pieces will create wonderful knitted gifts and garments!

Brother Profile KH500 knitting machine is a simple metal flat-bed machine without any automatic needle selection capabilities.

I cannot find information in which year this machine was introduced to the market. It looks very similar to earlier 4-push button machines but the row-counter is a bit more modern than the more vintage row counter which typically comes with the KH551 knitting machines I refurbished. So, it might be earlier 1970-ies when this machine was manufactured (but before the punch-card machines were introduced to the market). Other indicators that this machine was introduced to the market after the standard push button machines is that 1) the toolbox has a ratchet tool place (the ratchet tool is used in push button machines), and 2) there are slots for the extension rails (present in 8-push button machines equipped with a lace carriage). I suspect that it was a lightweight alternative to the push-button machines.

Like most standard knitting machines (with the gauge, or distance between needles, of 4.5 mm), it has 200 needles. With manual needle selection, this machine can knit sli-, tuck- and fair-isle type patterns. In my video, I showed some of these patterns on couple of swatches. After the corresponding needles are selected, pushing the buttons on the carriage (two left ones for tuck and two right ones for slip) allows knitting with texture/pattern.

This machine is simple but offers tremendous potential for those who want to continue to feel the satisfaction of knitting manually. This machine is excellent for those transitioning from hand-knitting to machine knitting, for those who are not quite ready to give up control over stitch manipulations to the machine, for those who like simple knits but can’t quite get the stitches even, and for fiber artists.

The standard setup comes with cast-on combs, a tool box to store all minor assesories, a tension mast, a row counter, a carriage, and a sinker plate.

The main bed has slots for the extension rails but the rails are not included with the standard setup. Lace carriage is NOT included.

The machine is lightweight, potentially because the bed is narrower than later knitting machines and also because the KH500 setup does not include the lid. In a way, no lid is another advantage – those lids are sometimes so hard to close, especially if they are a bit bend (these machines are old and who knows what happened to them during all those years of storage and transport from place to place) or if the parts inside the lid (often it is recommended in later models with lids to fit the sinker plate, cast-on combs and tension mast inside the lid) are shifted or mounted incorrectly. The bottom line: I struggle so often with the lid closing in other machines that I was kind of relieved that this model does not have a lid.

About this particular machine:

A hard copy of the manual will not be provided. But an electronic copy can be accessed online for free.

The machine comes with all assesories. It will come with the original cardboard box (although it is somewhat beat up). The cast-on combs, brand-new looking from old stock, like never being used, will be included as well. The small claw weights are, for some reason, are not mentioned in the manual. They are pretty important – so I included them.

There are some minor rust spots on the sinker plate.

The name tag on the carriage fell off. (If I find it – I will ship it to whoever buys this machine. But I suspect the name tag was not included and simply got lost). The two left-hand side buttons are tuck, the middle button is reset/stockinet and the two right-hand side buttons are part/slip.

The yarn tension dial is a bit chipped off. The carriage worked well regardless. The chipped area does not have any cracks and the dial moves freely.

The two round pillars to screw the handle onto the carriage are a bit discolored. I decided not to polish it not to remove even more of a protective coating. The handle still crews on without problems.

All these flaws are very minor and did not affect the working of the machine. I hope you will consider purchasing it and if not, I hope you enjoyed reading this article about this wonderful machine.